Tm41 Terminal Module; Tm54F Terminal Module - Siemens SIMOTION D410-2 Manual

Spare parts / accessories

6.3 TM41 terminal module

6.3 TM41 terminal module
Properties
The TM41 terminal module can be used to expand the number of digital I/Os and analog
inputs within a drive system. In addition, it enables the use of the TTL output for encoder
simulation. The TM41 is connected via DRIVE-CLiQ.
Interfaces
The TM41 contains the following terminals:
Table 6- 3
Type
Digital inputs
Digital I/Os
Analog inputs
TTL encoder output
The 50 mm clearances above and below the component must be observed.
Additional references
For further information on the TM41 terminal module, see the
Commissioning and Hardware Installation Manual.
6.4

TM54F terminal module

Properties
The TM54F terminal module is a terminal expansion module for snapping on to a DIN EN
60715 mounting rail. The TM54F offers safe digital I/Os for control of Safety Integrated
functions of SINAMICS.
A SIMOTION D410-2 can be assigned exactly one TM54F, which is connected via DRIVE-
CLiQ.
The TM54F terminal module is an alternative to using Safety Integrated functions via the
onboard terminals (F-DI, F-DO) or via PROFIsafe.
78
TM41 interface overview
CAUTION
Number
4
4
1
1
SIMOTION D410-2
SIMOTION D410-2
Manual, 02/2012