Led Displays - Siemens SIMOTION D4 5 Series Manual

Supplementary system components
6.5 CBE30 communication board Ethernet
Position of the ports
The interfaces are located on the front side of the CBE30.
Figure 6-11
6.5.4.2

LED displays

Position of the LEDs
The X1400 interface with the four ports has integrated LEDs for displaying the link and the
activity for each port. The front panel of the board is also fitted with two LEDs (Fault and
Sync), which indicate the bus status.
Table 6- 30
LED
link
Activity
Sync
Fault
Additional references
Detailed information on the states of the status LEDs can be found in
SIMOTION D4x5
106
CBE30 interface
Meaning of the LED displays
Meaning
... indicates whether a different device is connected to port x and a physical
connection exists
... indicates whether data is being received or sent at port x
... indicates the synchronization status of the PROFINET IO interface
... indicates a fault state of the PROFINET IO interface
Commissioning and Hardware Installation Manual, Diagnostics chapter.
SIMOTION D4x5
Manual, 02/2012