Controller Extension Cx32; Overview Of Cx32 - Siemens SIMOTION D4 5 Series Manual

Supplementary system components

6.4 Controller Extension CX32

6.4 Controller Extension CX32
6.4.1

Overview of CX32

Properties
The CX32 is a module in SINAMICS S120 booksize format. The CX32 allows scaling for the
drive-end computing performance of the SIMOTION D435, D445 and D445-1 Control Units.
Each CX32 can control up to 6 additional servo axes, 4 vector axes or 8
The controller extension has 4 DI, 4 DI/DO and 4 DRIVE-CLiQ interfaces.
Drive quantity structures
If one or more CX32 modules are being used on a SIMOTION D435 or D445/D445-1, the
number of drives that can be used on the SINAMICS Integrated is reduced by one. This
gives the following quantified volumes:
SIMOTION V4.1/V4.2 (SINAMICS V2.5/V2.6)
Table 6- 10
SERVO D435
SERVO
D445/D445-1
VEKTOR D435
VECTOR
D445/D445-1
V f
/
V f
/
ALM = Active Line Modules; Basic Line Modules (BLM), and Smart Line Modules (SLM)
1)
can also be used.
88
SIMOTION V4.1/V4.2 (SINAMICS V2.5/V2.6) quantity structure
SINAMICS
Integrated
5+1 (5 drives+
1 ALM
1)
5+1
3+1
3+1
D435 7+1
D445/D445-1 7+1
1. CX32
6+1
)
6+1
4+1
4+1
8+1
8+1
V f
/
2. CX32 3. CX32
6+1 -----
6+1 6+1
4+1 -----
4+1 4+1
8+1 ----
8+1 ----
axes.
4. CX32
-----
6+1
-----
4+1
----
----
SIMOTION D4x5
Manual, 02/2012