JUKI KE-2070 Operation Manual page 24

Operation manualⅠ
Step 8 Check the component pick-up position.
Track the X and Y coordinates (component pick-up coordinates) and the Z coordinate
(component pick-up height).
①
②
③ The "Pick position tracking" screen appears.
The X, Y and Z coordinates appear here.
Select the desired item and use the HOD
to perform a teaching operation.
* See Section 4.5.4.4 "Confirmation" of the
"Instruction Manual CD" for details of how to
track a component pick-up position with a
camera.
1. Select the "Supply Device" tab from the
"Quick Setup" screen.
2. Select the <Pick Track Manual> button.
Select the <OK> button.
■ If the component pick-up position (X, Y
and Z) is shifted
1. Press the
<CAMERA> key.
(For the Z
coordinate, press
the <HMS> key.)
2. Adjust the X and
Y coordinates.
3. Press the <ENTER>
key. The
coordinates are
validated, and the
camera moves to
the next component.
■ If the component pick-up position is correct
When you press the <NEXT>
key, the camera moves to the
next component.
2− 13
VACUUM
HMS HEAD CAMERA
ON/OFF
J U K I
F1 F2 F3 F4
No.
-X+Y +Z+Y +X+Y
-θ-X FAST +θ+X
-X-Y -Z-Y +X-Y
DEV.NAME
WINDOW PREVIOUS PAUSE
CANCEL NEXT ENTER