JUKI KE-2070 Operation Manual page 20

Operation manualⅠ
<Step 4> Adjust the pusher X and the pusher Y.
① Select the <Side clamp> button on the "Independent control of conveyor" dialog
box to operate the pusher X and the pusher Y.
② Adjust the pusher X position.
Pusher X
Select the <Side clamp> button.
Operate the <ON> button, the
<OFF> button and/or the <ON/OFF>
button.
The pusher X and the pusher Y start
moving at the same time.
Turn the adjustment handle to adjust
the pusher X position to the board.
After adjusting the pusher X position
Pusher Y
so that a 0.5-mm clearance can be
generated between the pusher X and
the board, fix the adjustment stopper.
When you use a thin board, check to
see if it does not warp in the upper
direction after it is fixed.
If it warps, adjust the pressure of the
pusher Y.
* See Section 2.7.1.4 "Edge reference
adjustment" of the "Instruction Manual
CD" for how to adjust the pressure of
the pusher Y.
2− 9