Operation manualⅠ
Chapter 1
1.1. Overview of this machine
This machine is a mounter that places electronic parts on an electronic circuit board on
which solder is pasted or to which adhesive is applied.
After the head picks up a component from a component supplying device (such as a
tape feeder) and finds the center of the component, it places the component on the
programmed placement coordinates of a board.
③ The component is
placed on a board.
Overview of the Machine
The center of the component is
②
detected and the component is
moved to the placement position.
①A component is picked up.
1-1