JUKI KE-2070 Operation Manual page 26

Operation manualⅠ
Step 9 Perform PWB production.
Enter the desired value in the "Planed No. of PWBs" field on the "Prod Control" screen,
and then press the <START> switch.
PWB production starts. (Refer to Section 2.8.2 "Production condition screen" of the
"Operation Manual II" for details of the production screen.)
WARNING
①
②
When you press the <STOP> switch once, the machine is put into the pause state. When
you press it again, the "Suspend" screen appears.
When using the IFS-NX: Be sure to complete verifying the components before pressing
the <Start> button. You cannot start a production without completing the verifications.
When you press the <START> switch, the machine starts operating.
To avoid risk of injury, never put your hand or head inside the
machine.
<Operation panel>
Press the <START> switch.
PWB production starts.
When the number of produced PWBs
reaches the specified value or when you
press the <STOP> switch, the current PWB
production finishes.
When you select the <OK> button,
the current PWB production finishes.
2− 15
Enter a value in the "Planned
No. of PWBs" field.