JUKI KE-2070 Operation Manual page 4

High-speed chip shooter, high-speed flexible mounter
Hide thumbs Also See for KE-2070:
Table of Contents

Advertisement

Basic Matters of Precaution
1.
Be sure to read all documents included in this Manual and the attached booklet before using this
machine. Also, keep this Manual carefully so as to be able to read it whenever necessary.
2.
Contents of this Manual include items that are not included in specifications of the machine purchased.
3.
The machine should be operated only by the operator who has learned how to run it.
4.
Regarding the repair or maintenance (excluding daily inspection and other matters specified in the
Manual), ask our company or its agent to do it.
5.
General maintenance, inspection, and repair (matters specified in this Manual) shall be conducted only
by specialized maintenance engineers who have finished the maintenance course specified by our
company.
With regard to repair (matters specified in this Manual), use genuine parts of our company.
Safety Equipment, Alarm Label
1.
In order to prevent accidents due to nonpresence of safety equipment, start to
operate this machine only after confirming that the equipment is suitably installed at the specified
position.
2.
If the safety equipment is dismantled, be sure to attach it to its original position, and confirm that it
operates normally.
3.
Make sure that the warning label stuck to the machine will be always clearly visible.
If it has been peeled off or stained, order new labels from our company and exchange old labels with
new ones.
4.
If the safety equipment is damaged, remove it. Never operate the machine. If you operate the
machine without the safety equipment, it may lead to severe accidents involving serious personal
injuries or even death.
<Where to stick warning labels>
Front
Application
1.
Never use this machine for purposes other than its original application.
Our company will not be responsible in the case of its use for other application.
2.
Do not remodel this machine. Our company will not be responsible for any accident arising as a
result of its remodeling.
Operational Training
1.
To prevent accidents due to unaccustomed handling, operation of this machine must be limited to
operators who have participated in the operation training specified by our company and have
appropriate knowledge and operating skills.
CAUTION
Safety cover
Moving parts
warning label
"Take care not to be
caught in the machine
warning label
Moving parts
warning label
High voltage
warning labels
ii
Rear

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ke-2080rKe-2080

Table of Contents