Table of Contents
Advertisement
Matters of Caution for Safe Use of KE-2070/2080/2080R
1.
To prevent accidents due to electric shock, do not open the electrical equipment box while
power supply is on.
2.
To prevent electric shock, do not operate the machine, with the grounding line unlinked.
DANGER
1.
To prevent damage to human bodies, do not operate the machine, with the safety cover
or equipment removed.
2.
To prevent damage to human bodies, make sure that hair, clothes, etc., will not be caught
by the conveyor chain.
Also, keep off gloves.
CAUTION
3.
To prevent damage to human bodies, turn off power supply during maintenance
(greasing, adjustment, and daily inspection).
4.
To prevent damage to human bodies, use an earth leakage breaker for the power line.
1.
Windows XP (including the Ethernet communication function) is adopted as the Operating
System of this machine.
If you install on this machine any software not designed for this machine, we cannot
guarantee that the machine functions properly. If you move or rename a file stored in the
hard disk drive (HDD) or compress or copy a file or a folder, we cannot guarantee that
CAUTION
either.
•
The Enhanced Write Filter (EWF) component is used and the drive C is used as ROM to
protect the Operating System (OS).
1.
Do not store any file onto the drive C.
When you try to store a file onto the drive C used as ROM, the file storing operation is
emulated with the main memory. Therefore, when you save a file onto the drive C, the
main memory is used and it weighs down the system. When you repeat saving data on
the drive C, the amount of the memory becomes insufficient and the system displays an
error, so you may have to restart this machine.
2.
When you have to change any information of the OS, update the drive C. See Section
1.6 "Updating the Drive C" of this Instruction Manual for how to update the drive C.
Operations that require modification of the OS information are as follows:
CAUTION
− Version-up of KE-2070/80/80R system software and Flexline DB
− Calibration of the touch panel
− Addition of a printer
− Setting of the network (such as settings of the IP address and a work group)
− Addition of a user
− Changing of the Explorer settings
− Changing of the UPS utility (UPSilon 2000) settings
•
1.
A UPS is incorporated into this machine to protect a production program and any other
data at power failure.
To prevent a battery built into the UPS from degrading, do not leave this machine without
turning it on for six months or longer.
CAUTION
•
<Safety cover>
1.
When opening/closing the safety cover, pay attention to the following items.
•
CAUTION
•
•
1.
Do not step onto the machine during setup or similar operation because it may damage
the cover or other parts.
CAUTION
Should the machine not operate properly due to any operation above, replace your
SSD or HDD with a new one, and so your data may be lost.
When you change the OS information, you have to restart this machine after updating
the drive C.
Only when the main circuit breaker and main switch are set to ON, this machine is
assumed to be turned on.
When opening the cover, push up the cover until it is locked and release it after
confirming the locked status.
If the cover is released in a non-locked status, it may fall.
When closing the cover, release the locked status and then close the cover.
During a release operation, take care not to get hurt due to falling of the cover.)
Do not apply an excessive load to the cover, handle, etc.
iv
Hide quick links:
Advertisement
Table of Contents
