JUKI KE-2070 Operation Manual page 15

Operation manualⅠ
Step 3 Load a production program.
①
② The "Open" dialog box appears on the screen. Select the desired production
program, and select the <Open> button.
When the mounter is equipped with the automatic conveyor width adjustment
device (optional), the following message appears on the screen.
* Refer to Section 4.5.4.1.2 "Automatic conveyor width adjustment" of the
"Instruction Manual CD" for details of automatic conveyor width adjustment.
WARNING
When you select the <Yes> button on this screen,
the "Auto conveyor" dialog box appears on the screen.
When you select the <Move> button on the "Auto conveyor" dialog
box, the conveyor starts moving. Before selecting this button,
check to see if there is no substance that may be in contact with
the movable parts of the conveyor.
Select the
from the main screen.
<Procedure>
1.
2.
3.
The selected file name appears here.
2− 4
button
Select a folder.
Select a file.
Select the <Open> button.