Error Messages Related To Whiteboard Sharing - Ricoh IWB-D1 Field Service Manual

Error messages related to whiteboard sharing

Message
"Cannot connect because the
software version is different."
"Update the host terminal and the
participating terminals to the latest
version."
"Cannot connect because the
software version is different."
"Update the host terminal and the
participating terminals to the latest
version."
"Terminal (IP Address) tried to
connect but was unable to
participate because 4 locations
are already connected."
Cause
When participating in the
remote WB sharing, the
versions of the software of the
sponsorship terminal and the
participating terminal differ.
It has already been connected
from four bases.
Four terminals have already
participated in the main part
currently shared.
Error messages
Solution
Close the whiteboard once,
and then update the system.
Ask a system administrator
about renewal of the system.
Stand by until one of the
participating terminals leaves.
Stop sharing with the
apparatus participating from
other bases.
119