Table of Contents
Advertisement
Troubleshooting
Displayed Error Messages
The following messages may appear while you are operating or programming
the machine.
CHECK AUTO-DIALING
NO FILE EXISTS
TOO MANY DEST.
6
USED AS GROUP
USED AS PROGRAM
USED AS DIAL
USED AS GROUP KEY
NOT PROGRAMMED
ALREADY PROGRAMMED
PLEASE SET PAUSE
112
You cannot use the auto-dialer at the mo-
ment. Use the ten key pad or the handset.
No polling reception operations have
been programmed.
There are no messages in memory waiting
for transmission.
Incorrect file number. Check the file
number and try again.
The memory cannot hold any more tele-
phone numbers. Either:
• Delete some numbers then try again.
• Wait until some of the Send Later or
other delayed transmissions waiting in
memory have been carried out, then
try again.
This Quick Dial Key has a Group stored in
it.
This Quick Dial Key has a Keystroke Pro-
gram stored in it.
This Quick Dial Key has a telephone
number stored in it.
This Quick Dial Key is programmed as
Group Key.
Either:
• This Quick Dial Key or Speed Dial
Code does not contain a number.
• This Quick Dial Key does not contain a
Keystroke Program.
Either:
• This number is already included in this
Group.
• This RTI/CSI has already been stored
for use with this feature.
You must add a pause after your area
code when you input your fax terminal's
own telephone number.
Advertisement
Table of Contents
