Commissioning; Specifying The First Direction Decision; External Parameterization Of The Fieldbus Address Using Code Cards; Product Documentation On The Internet - Pepperl+Fuchs PGV -F200 -B6-V15B Series Manual

PGV...-F200/-F200A...-B6-V15B

Commissioning

6 Commissioning
Warning!
Do not operate the power switch in a hazardous location.
6.1

Specifying the First Direction Decision

To ensure that the read head does not report any error messages after being switched on, a
direction decision must be specified. You can control the direction decision via the
INPUT_SELECTION_DIR_RIGHT and INPUT_SELECTION_DIR_LEFT inputs. .
INPUT_SELECTION_DIR_LEFT
INPUT_SELECTION_DIR_RIGHT
Figure 6.1
Direction Decision via Protocol
If a decision on the direction to take is sent to the read head via a protocol, the input signals are
ignored until the read head is reset. .
6.2

External Parameterization of the Fieldbus Address Using Code Cards

During external parameterization of the fieldbus address, the reader scans the special code
cards optically and configures the relevant fieldbus address. Simply hold the corresponding
code cards at the correct distance in front of the lens on the reader.
You can find the manual for the code cards for configuring the fieldbus address at
www.pepperl-fuchs.com. See chapter 6.2.1.
6.2.1

Product documentation on the Internet

You can view all the relevant documentation and additional information on your product at
http://www.pepperl-fuchs.com. Simply enter the product name or model number in the
Product/Key word search box and click Search.
Select your product from the list of search results. Click on the information you require in the
product information list, e.g., Technical documents.
A list of all available documents is displayed.
36
Direction decision Error 5
≥ 20 ms
1
0
1
0
Left Right Left Error 5
t