Pepperl+Fuchs PGV -F200 -B6-V15B Series Manual page 26

PGV...-F200/-F200A...-B6-V15B
Installation
The distance between a colored tape and a Data Matrix control code must be between 0 mm
and 5 mm.
Figure 5.18
The distance between a Data Matrix position code and a Data Matrix control code must be
between 0 mm and 5 mm.
Figure 5.19
A lane can switch from a colored tape to a Data Matrix code tape and back again as often as
required. The distance between the colored tape and the edge of the Data Matrix code must be
between 0 mm and 10 mm
28
25 mm D
0 mm ≤ D ≤ 5 mm
25 mm D
0 mm ≤ D ≤ 5 mm
10...40 mm D 25 mm
25 mm D 25 mm