Pepperl+Fuchs PGV -F200 -B6-V15B Series Manual page 24

PGV...-F200/-F200A...-B6-V15B
Installation
Distances
To ensure that the read head can clearly detect and assign colored tapes and Data Matrix
codes, minimum and maximum distances must be observed when creating the lanes.
Offset V between position codes of a lane must not be greater than 5 mm.
Figure 5.15
The distance D between the colored tapes at a branch or intersection as a separate lane must
not exceed 15 mm. The distance decreases if the guiding colored tape cannot be detected by
the read head in the center of the reading window.
26
Offset: 0 mm ≤ V ≤ 5 mm
V