Pepperl+Fuchs PGV -F200 -B6-V15B Series Manual page 28

PGV...-F200/-F200A...-B6-V15B
Installation
Code Tape Dimensions
Figure 5.21
Position the code tape so that the www.pepperl-fuchs.com label and the position markings
are to the right of the Data Matrix code in the X direction. The position values then increase
along the X direction.
Data Matrix Code Tapes with a Starting Position of 0 m
Order designation
PGV10M-CA25-0
...
PGV100M-CA25-0
Table 5.1
Data Matrix control codes
Order designation
PGV-CC25-001
...
PGV-CC25-999
Caution!
Stop edges
If you attach another code tape at the end of a previous code tape, the code pattern of 20 mm
must be retained.
Note!
Bends
If mounting the code tape in corners, cut the code tape several times as illustrated.
30
The center line indicates the center of the code tape and not the center of the code
See also data sheet PGV*-CA25-* at www.pepperl-fuchs.com
Description
Code tape, length: 10 m
...
Code tape, length: 100 m
Description
Code tape, Control Code 001, length: 1 m
...
Code tape, Control Code 999, length: 1 m