Correct Assembly - Siemens SIPROCESS GA700 Compact Operating Instructions

Installing
3.1 Basic safety instructions
Note
Vibration-free installation
Install the explosion-proof analyzer and - if required - the Ex px safety equipment at a location
free from vibrations.
3.1.2

Correct assembly

NOTICE
Incorrect assembly
The device can be damaged or destroyed or its functionality impaired through incorrect
assembly.
● Make sure before installing the device that there is no visible damage.
● Check that the process connections are clean and the right seals and cable glands have
● Mount the device using a suitable tool. Refer to the information in Chapter "Technical
Note
Loss of degree of protection
Damage to device if the enclosure is open or not properly closed. The degree of protection
specified on the rating plate or in section → Technical specifications (Page 79)lHotspot-Text
(Page 79) is no longer guaranteed.
● Make sure that the device is securely closed.
NOTICE
Damage to the membrane keyboard and the display
Make sure when installing the rack-mounted device that the membrane keyboard and display
are not damaged.
30
been used.
specifications (Page 79)", for example, torques for installation.
Devices in explosion-proof design
Compact Operating Instructions, 05/2015, A5E35134047-02