Service And Maintenance; Safety Instructions - Siemens SIPROCESS GA700 Compact Operating Instructions

Service and maintenance

7.1

Safety instructions

Impermissible accessories and spare parts
Danger of explosion in areas subject to explosion hazard or device damage.
● Only use original accessories or original spare parts.
● Observe all relevant installation and safety instructions described in the instructions for
Commissioning and operation with error message
If an error message is displayed, correct operation in the process is no longer guaranteed.
● Check to see which error is pending.
● Correct the error.
● If the error continues to exist:
Improper connection after maintenance
Danger of explosion in areas subject to explosion hazard or device damage.
● Connect the device correctly after maintenance.
● Close the device after maintenance work.
See chapter "Analyzer (Page 76)".
Dangerous voltage at open device
Danger of electrocution when the enclosure is opened or enclosure parts are removed.
● Disconnect the device before you open the enclosure or remove enclosure parts.
● Observe the special precautionary measures if maintenance is required while the device
Devices in explosion-proof design
Compact Operating Instructions, 05/2015, A5E35134047-02
WARNING
the device or enclosed with the accessory or spare part.
WARNING
– Take the device out of operation.
– Prevent a new commissioning.
WARNING
CAUTION
is live. Have maintenance work carried out by qualified personnel.
7
73