Siemens SIPROCESS GA700 Compact Operating Instructions page 163

Navigation-relevant keys
Table 5-1
Keys
List of the current messages in the main view
This function represents a simplified operator control variant compared with menu [3.01.1].
Here, in the main view all the current messages can be displayed without changing to the
device menu.
"Current messages" are all messages still pending and all messages requiring
acknowledgement that have not yet been acknowledged. The last message entered in the list
is always at the top (sorted in descending order according to date and time). It is not possible
to filter messages.
The list view is permanently updated. If, for example, not only the incoming message but also
an outgoing message is registered, the device removes the corresponding list entry.
To display detailed information about the current messages in the main view, follow the steps
below:
1. If necessary, open the main view. To do this, press the <MEAS> key. Follow the instructions
on the display.
2. Display the list of current messages (display 4/4) in the main view. To do this, use the <▼>/
<▲> keys.
Devices in explosion-proof design
Compact Operating Instructions, 05/2015, A5E35134047-02
Functions of navigation-relevant keys
Function
Navigate to higher-level views/menus. Use the <MEAS> key to re‐
turn to the measured-value display in selection mode or to the main
view.
Navigate within a view/menu, and direct selection with the numeric
keys.
Navigate to subordinate views/menus. Direct selection with numeric
keys.
Operation
5.1 Local User Interface (LUI)
57