Hanseatic HHI6417SM User Manual page 44

Inductive glass ceramic hob
Table of Contents

Advertisement

Available languages

Available languages

Page GB-18
Cleaning the hob
Removing sugary or starchy food
waste, plastics or aluminium foil
NOTICE
Remove sugary or starchy food waste, plas-
tics or aluminium foil immediately. Other-
wise, these may cause permanent and ir-
reparable damage to the hob.
1. If possible, remove residues while hot
from the hot cooking zone surface using
an appropriate scraper.
2. Once the hob has cooled down, you can
remove stubborn dirt by using a specially
made, commercially available detergent.
3. Treat the hob with a special care product
after cleaning.
Something has boiled over on the
sensors
1. Switch the hob off.
2. Wipe the material that has boiled over us-
ing a soft rag.
3. Wipe the sensor surface with a slightly
damp cloth.
4. Wipe the sensor surface completely dry
with a paper towel.
5. Switch the hob back on.
If the sensors are dirty, e.g. if some-
thing has boiled over, the hob can turn
itself off. You will hear a signal tone. If the
sensors are dirty or damp, they may not
work.

Advertisement

Chapters

Table of Contents
loading

Table of Contents