Hart Parameter Description - ABB TTH300 Operating Instruction

8.2.3

HART parameter description

8.2.3.1 Menu: Device Setup
Menu / Parameter
... / Device Setup
Write protection
Input Sensor 1
Input Sensor 2
In-Output Assignment
Measured range
Damping
Factory Reset
OI/TTH300-EN
Configuration via the LC display with control buttons
Value range
Yes: Locked
Password: ≠ 0110
No: Unlocked
Enter password: 0110
Sensor 1
Sensor 2
Difference (S1-S2)
Difference (S1-S2)
Mean value
Electr. Meas. S1
Electr. Meas. S2
Redundancy
Temp. Electronics
0 ... 100 s
Yes / OK
Description
Activates write protection for the entire device
Selects submenu "Input Sensor 1"
Selects submenu "Input Sensor 2"
Selects the inputs that are mapped to the current
output
Selects submenu "Measurement range"
Configurable τ 63 % output signal damping value
Resets configuration data, adjustment data trim high /
low and DAC adjustment values to factory settings
TTH300 37