8.1.2
Process display
Fig. 21: Process display (example)
1 Measuring point identifier
2 Current process values
The process display appears on the LC display when the device is switched on. It shows
information about the device and current process values.
The way in which the current process values (2) are shown can be adjusted on the configuration
level.
8.1.2.1
Description of symbols
Symbol
OI/TTH300-EN
Configuration via the LC display with control buttons
-
1
2
PV
3
Description
Call up information level.
When Autoscroll mode is enabled, a
pages are automatically displayed one after the other.
Call up configuration level.
The device is protected against changes to the parameter settings.
TTH300
25. 7
°C
>100%
4
3
3 Symbol indicating button function
4 Symbol indicating "Parameterization
protected"
symbol appears here and the operator
A00260
31