ABB TTH300 Operating Instruction page 40

Configuration via the LC display with control buttons
Menu / Parameter
... / ... / Input Sensor 1 (continued)
... / ... / Input Sensor 2
Thermocouple RJ
ext. RJ Temperature
Menu / Parameter
... / ... / Measured range
Unit
Measured Range Begin
Measured Range End
8.2.3.2 Menu: Device info
Menu / Parameter
... / Device info
Device Type
Serialnumber
Softwareversion
Hardwareversion
HART Tag
HART Descriptor
Operation Time
40
Value range
internal
external fixed
none
Sensor 1 Temperature
-50 ... 100 °C
Value range
°C, °F, °R, K, user, mV, Ω,
mA
Configurable
Configurable
Value range
Description
Use of internal reference point for transmitter when
using thermal compensating line
Use of external, fixed reference point for transmitter
when using a constant thermostat temperature (can
be set with ext. reference point)
No reference point
Use of sensor 1 as reference point for sensor 2
Relevant for external reference point, specification of
constant external reference point temperature
Description
Selects physical unit for sensor measuring signal
Defines value for 4 mA
Defines value for 20 mA
Description
Displays device type
Displays serial number
Displays software version
Displays hardware version
Displays HART tag
Displays HART descriptor
Displays operating hours
TTH300 OI/TTH300-EN