ABB TTH300 Operating Instruction page 34

Configuration via the LC display with control buttons
8.1.5.3 Alphanumeric entry
When an alphanumeric entry is made, a value is set by entering the individual decimal
positions.
Next
Next
34
-----Menu name----
Parameter name
Value currently set
-----Parameter name----
ABC..........................
ABCDEFGHIJKLMNOPQ
1. Select the parameters you want to set in the menu.
2. Use to call up the parameter value for editing. The
position that is currently selected is highlighted.
Edit
3. Use to select the position to be changed.
4. Use or
5. Use to select the next position.
OK
6. If necessary, select and set other decimal positions
using the same procedure as described in steps 3 and 4.
7. Use to confirm your setting.
This concludes the procedure for changing a parameter
value.
TTH300
to select the required character.
OI/TTH300-EN