Omron AC1-152000 User Manual page 180

7 Maintenance
4
Right-click Rescue Disk Creator and then select Run as administrator.
The Rescue Disk Creator Utility window opens.
5
Select the connected USB storage device at Target disk:.
Refer to Messages on page 3-13 for message details if required.
The button Create Rescue Disk will be enabled as soon as a USB storage device is detected
and accepted.
6
Select the Create Rescue Disk button to start the creation process.
Wait until the progress bar shows the Rescue Disk creation finished.
Refer to Messages on page 3-13 for message details if required.
7
Select Close to close the Rescue Disk Creator.
The Rescue Disk is available but it is still empty, there is no system backup on the Rescue Disk.
Next step is to create a system backup with this Rescue Disk.
Additional Information
• Refer to Create a System Backup with the Rescue Disk on page 7-7 for system backup
details.
• Refer to Restore a System Backup with the Rescue Disk on page 7-28 for system restore
details.
7-6
IPC Application Controller User's Manual (I632)