Table of Contents
Advertisement
4-4
Environmental Specifications
This section provides environmental specifications of the IPC Application Controller.
4-4-1
Operation Environment Specifications
The following table provides the general environmental specifications for the IPC Application Control-
ler.
Item
Ambient operating temperature
Ambient storage temperature
Ambient operating humidity
Ambient storage humidity
Operating atmosphere
Altitude
Noise resistance (during operation)
Vibration resistance (during opera-
tion)
Shock resistance (during operation) Conforms to IEC 60068-2-27.
Pollution degree
RTC accuracy
*1.
Refer to 4-4-2 Temperature and Humidity Specifications on page 4-24 for ambient operating temperature
details per CPU type.
*2.
Vibration resistance depends on the IPC's mounting orientation and storage device type:
Mounting Orientation
Book
Wall
IPC Application Controller User's Manual (I632)
*1
0 to 55°C
*1
-20 to 70°C
10% to 90% with no condensation
10% to 90% with no condensation
No corrosive gases
2,000 m max.
Conforms to IEC61000-4-4, 2kV (power lines)
Conforms to IEC 60068-2-6.
For a IPC with an SSD: 5 to 8.4 Hz with 3.5 mm single amplitude and 8.4
to 150 Hz with 9.8 m/s² for 10 times each in X, Y and Z directions.
For a IPC with a HDD the vibration resistance depends on the mounting
*2
orientation
.
147 m/s², 3 times in each X, Y and Z directions
JIS B3502 and IEC 61131-2: 2 or less
At ambient temperature of 55°C: −3.5 to +0.5 min error per month
At ambient temperature of 25°C: −1.5 to +1.5 min error per month
At ambient temperature of 0°C: −3 to +1 min error per month
SSD or CFast Card
9.8 m/s²
4 Specifications
Specifications
HDD
2.5 m/s²
4.9 m/s²
4
4-23
Advertisement
Table of Contents
