Table of Contents
Advertisement
7 Maintenance
7-2-3
Replace the Fan Unit
The fans are mounted in the Fan Unit.
Use the following procedure to replace the Fan Unit.
Precautions for Safe Use
If the replacement Fan Unit has been stored over 6 months then check the performance of the
Fan Unit after replacement.
Additional Information
Refer to 2-8-2 Fan Unit on page 2-16 for the model.
1
Power OFF the IPC.
2
Remove the Cover of the IPC.
Additional Information
Refer to 7-2-2 Remove the Cover on page 7-17 for the cover removal procedure.
3
Disconnect the Fan Connectors from the board.
7-18
IPC Application Controller User's Manual (I632)
Advertisement
Table of Contents
