Table of Contents
Advertisement
Machine Controller Tabs
The Industrial PC with Machine Automation Control Software has additional tabs available.
Examples are:
• Controller Status, to display operation mode and current errors.
• Controller Operation, to change operating mode or backup / restore the controller.
• Network Setting, to display and change network settings
• Virtual SD Memory Card Settings, to change the Virtual SD Memory Card Settings. .
These Machine Controller tabs are only relevant for an Industrial PC with Machine Automation Control
Software. Refer to NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Setup
User's Manual (Cat. No. W568) for details.
Installation
The Industrial PC Support Utility is pre-installed on the Industrial PC if it comes with a Windows oper-
ating system installed.
Download the Industrial PC Support Utility from the OMRON website if reinstallation is required.
Additional Information
A new installation on a Windows 10 PC will require the installation of the .net Framework.
The .net Framework software can be downloaded from a Microsoft website.
Startup
The Industrial PC Support Utility can be started from:
• Windows Start Menu
Select OMRON and then Industrial PC Support Utility.
• Industrial PC Tray Utility
• Windows desktop shortcut
Messages
The Industrial PC Support Utility does not display messages in the Industrial PC Tray Utility.
A battery warning and a fan warning are not displayed in the Industrial PC Tray Utility.
IPC Application Controller User's Manual (I632)
3 Software
3
3-9
Advertisement
Table of Contents
