Forced Trunk Disconnect - NEC UNIVERGE SV9100 General Description Manual

Flexible System Numbering
Flexible System Numbering lets you reassign the system port-to-extension
assignments. This allows an employee to retain their extension number if they move
to a different office. In addition, factory technicians can make comprehensive
changes to your system number plan. You can have factory technicians:



Talk to your sales representative to find out if this program is available to you.
You can also use Flexible System Numbering to change the system Trunk Group
Routing code. Although the default code of 9 is suitable for most applications, you
can alter the code if needed.
Flexible Timeouts
The Flexible Timeouts feature provides a variety of timers in the Resident System
Program to allow the system to operate without initial programming. The system
timers can be changed to meet customer needs according to the system application
requirements.

Forced Trunk Disconnect

Forced Trunk Disconnect allows an extension user to disconnect (release) another
extension active outside call. The user can then place a call on the released trunk.
Forced Trunk Disconnect lets a user access a busy trunk in an emergency, when no
other trunks are available. Maintenance technicians can also use Forced Trunk
Disconnect to release a trunk on which there is no conversation. This can happen if a
trunk does not properly disconnect when the outside party hangs up.
CAUTION
General Purpose Relay
The system allows up to eight general purpose relays using PGD(2)-U10 ADP's (four
relays per PGD unit) and one general purpose relay built into the GCD-CP10 for a
maximum of nine relays. These relays are normally opened and can be closed by
dialing an access code on any terminal or pressing a preprogrammed function key on
any multiline terminal.
SV9100 General Description Manual
Set the number of digits in internal (Intercom) functions. For example, extension
numbers can have up to eight digits.
Change your system Service Code numbers.
Assign single digit access to selected Service Codes.
Forced Trunk Disconnect abruptly terminates the active call on the line. Only
use this feature in an emergency and when no other line is available.
Issue 2.0
2-29