Table 5-21 Tone Patterns - NEC UNIVERGE SV9100 General Description Manual

Issue 2.0
S 8 A
ECTION UDIBLE AND
8.1
8.2

Table 5-21 Tone Patterns

System Tone
(Fixed)
Busy Tone
Call Waiting Tone
Second Dial Tone
Howler Tone
Internal Dial Tone
Internal Ringback Tone
LCR Dial Tone
Reorder Tone
Service Set Tone
Special Dial Tone
5-30
V I
ISUAL NDICATION
Tone Patterns
Table 5-21 Tone Patterns
are used to inform UNIVERGE SV9100 station users of system functions such as
dial tone, busy tone, or ringback tone.
Multiline Terminal LED Flash Patterns
The UNIVERGE SV9100 system has several colored LEDs installed. Green is
used primarily for I-Use conditions and for outside calls. Red is used primarily for
Other Use conditions and internal calls.
The Large LED provides the user a variety of programmable colors and
preferences. Refer to Table 5-22 Multiline Terminal LED Flash
Frequency (Hz) Intermit
(Fixed) (Default)
480/620 60 IPM
440 60 IPM
350/440 120 IPM
2400 Modulation
Continuous
(16 Hz)
350/440 Continuous
1 sec On
440/480
2 sec Off
440 Continuous
480/620 120 IPM
440 Continuous
440 240 IPM
lists the frequency and the pattern for the tones. Tones
0.5 sec
0.5 sec
0.5 sec
0.5 sec
0.25 sec
0.25 sec
1 sec
2 sec
0.125 sec
0.125 sec
Pattern.
Cycle
0.25 sec
0.25 sec
Hardware Specifications