NEC UNIVERGE SV9100 General Description Manual page 12

Issue 2.0
INDUSTRY CANADA REQUIREMENTS
Industry Canada has established rules that permit this telephone system to be directly connected to the
telephone network. Prior to the connection or disconnection of this telephone system to or from the
telephone network, the telephone company must be provided with the following information.
This product meets the applicable Industry Canada Technical Specifications/Le present material est
conforme aux specifications techniques applicables d'industrie Canada.
1. Your telephone number.
2. IC registration number:
3. Ringer Equivalence Number (REN) of the equipment: 0.7
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe system, when present, are connected together. This
precaution may be particularly important in rural areas.
Users should not attempt to make such connections themselves, but should contact the applicable
electrical inspection authority or electrician.
CAUTION
The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to
be connected to the telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of RENs of all the devices does not
exceed five/L'indice d'equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaus
qui peuvent etre raccordes a une interface telephonique. La terminaison d'une interface peut consister
en une combinaison quelconque de dispositifs, a la seule condition que la somme d'indices
d'equivalence de la sonnerie de tous les dispositifs n'excede pas 5.
This equipment has been certified by the Canadian Standards Association and found to comply with all
applicable requirements of the standard for telephone equipment C 22.2 No. 225.
This equipment meets IC requirements CS03, PART II, PART III, PART VI.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
as set out in the radio interference regulations of Industry Canada/Le present appareil numerique n'emet
pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de Classe A
prescrites dans le reglement sur le brouillage radioelectrique edicte par Industrie Canada.
R-6
IC: 140L-SN1750