Power Requirements; Power Supply Specifications - NEC UNIVERGE SV9100 General Description Manual

S 5 P
ECTION OWER
A dedicated 100VAC/120VAC/220VAC/230 – 240VAC 50Hz/60Hz circuit located
within seven feet of the chassis is required. A separate dedicated outlet for each
chassis should be installed.
5.1
SV9100 General Description Manual
Table 5-17 Cable Connection Between Analog Port and Single Line Equipment (Continued)
Connected
Equipment
LCA
OPX
Mixing digital and analog ports through the same 25-pair cable runs is not

recommended.
Table 5-18 Cabling Requirements
Connected Equipment
Music on Hold and Background Music Sources
External Amplifier
ITL Cabling
IP Video Doorphone
R
EQUIREMENTS
Double Pole/Neutral Fusing (power supply fuses are located at both the L
and N side).
NOTE

Power Supply Specifications

AC Power Supply:
Dedicated 15 Amp circuit

Power Requirements: 120 VAC @ 15A Controlling/Base Chassis

Maximum Feet from Connected Equipment
Cable
600 ohms (Including the SLT)
3,281 ft (1,000m) with 26 AWG
Twisted Pair
4,920 ft (1,500m) with 24 AWG
8,202 ft (2,500m) with 22 AWG
1,500 ohms or less (Including the SLT)
13,123 ft (4,000m) with 26 AWG
Twisted Pair
20,997 ft (6,400m) with 24 AWG
14,777 ft (10,600m) with 22 AWG
Issue 2.0
to Telephone
Cable
Hi-Fi Shielded Audio Cable
Hi-Fi Shielded Audio Cable
Cat 5 Straight Data Network Cable
– 328.1 ft (100m) maximum
distance
Maximum 100m (by LAN cable)
5-21