Forced Trunk Disconnect - NEC DS1000 Feature Handbook

Disconnect a co-worker's
outside call in an
emergency.
lets you access a busy line in an emergency — when no other
outside lines are available. Normally, Forced Trunk Disconnect is
reserved only for attendants and supervisors.
Forced Trunk Disconnect abruptly terminates the active call on
the outside line. Only use this feature in an emergency — when
no other outside lines are available.
To disconnect a busy outside line:
1. Press line key for busy outside line.
Press
401 for line 1.
2. Dial
Press
To place a call after using Forced Trunk Disconnect:
1. Hang up.
2. Press the line key and dial your number.

Forced Trunk Disconnect

!! CAUTION !!
Line keys are red when busy.
OR
and dial the line's Line Access Code (e.g.,
to disconnect the line.
OR
MORE DISC
+
The line key goes out and you hear Intercom
dial tone.
You hear Intercom dial tone after step 2 above.
Forced Trunk Disconnect allows
you to disconnect (release) anoth-
er extension's active outside call.
This is a powerful feature that
.
37