Class Of Service - NEC UNIVERGE SV9100 General Description Manual







There are 400 available trunks.

Class of Service

Class of Service (COS) sets various features and dialing options (called items) for
extensions. The system allows any number of extensions to share the same Class of
Service. An extension can have a different Class of Service for each Night Service
mode. This lets you program a different set of dialing options for daytime operation,
nighttime operation and even during lunch breaks. An extension Class of Service can
be changed in system programming or via a Service Code (normally 677). There are
15 available Classes of Service.
Clock/Calendar Display
The system uses Clock/Calendar Display for:







Using the Daylight Savings Setup program, you can determine whether the system
should automatically adjust the system time for daylight savings time/standard time
changes.
Clock Adjustment
The system can be programmed to automatically adjust the system clock nightly.
This feature allows you to make adjustments should the system cabinet regularly
lose or gain time.
SV9100 General Description Manual
Press a Trunk Group Routing (dial 9) Key
Dial a code for a specific trunk (
Dial a code for a Trunk Group (704 + group number)
Dial a code for Trunk Group Routing or ARS (9)
Dial an Alternate Trunk Route Access Code (which you must define)
Press or Use a Speed Dial bin
Central Office Calls (Access Maps)
Class of Service (Class)
Direct Inward Lines
Display Telephones
Night Service (Automatic)
Programmable Trunk Parameters
Ring Groups
9 + the trunk number)
#
Station Message Detail Recording

System Reports

Toll Restriction (Class)

Trunk Group Routing

Voice Mail

Voice Response System

Issue 2.0
2-17