Distinctive Ringing, Tones And Flash Patterns - NEC SV9100 Feature Handbook

Distinctive Ringing, Tones and Flash Patterns

Operation
To listen to the incoming ring choices:
1. Press Speaker.
2. Dial 711.
3. Dial 1 to check ringing for intercom calls.
- OR -
Dial 2 to check ringing for trunk calls.
4. For Intercom calls, select the pitch you want to check (1~8).
- OR -
For trunk calls, select the pitch (1~8) and the tone (1~4) you want to check.
5. Go back to step 4 to listen to additional choices or press Speaker to hang up.
To change the pitch of your incoming ring (multiline terminal only):
1. Press Speaker.
2. Dial 720.
3. Dial 1 to change ringing for Intercom calls.
- OR -
Dial 2 to change ringing for trunk calls.
4. Select the pitch (1~8).
5. Press Speaker to hang up.
Page 23 of 60