2.14 Headset; 2.15 Volume Setting; 2.16 Ring Volume Setting; 2.16.1 Ringer Tone/Volume Selection - NEC Dterm DTZ-8R-1 Owner's Manual

2.14 Headset

2.15 Volume Setting

2.16 Ring Volume Setting

Owner's Manual
To put the handset into Headset mode:
Insert the headset plug in headset jack while in Talk mode or Handsfree Talk
mode. The handset switches to the headset.
In the headset condition, the user can change Handsfree mode to Talk mode.

However the handset keeps the headset condition.
Insert the headset plug into the headset jack when in handsfree condition. The

Handsfree icon remains on.
A tone is emitted from the handset speaker when the headset is connected.

The following modes have volume settings: Talk mode, Handsfree Talk mode and
headset.
During each mode, you can press the Up (▲) or Down (▼) keys to increase or
decrease the volume. As you increase/decrease the volume setting, the setting is
displayed on the LCD from Level 1 to Level 6. After the volume is changed, the
LCD shows the current volume setting for five seconds.

2.16.1 Ringer Tone/Volume Selection

When the Volume (soft key 1) key is pressed while in Standby, the handset
switches to Ringer Volume Setting
on the LCD.
and the current setting is displayed
mode

Up

Down
Issue 1.0
6-19