Leica TS11 User Manual page 80

TS11/TS15, Check & Adjust
Next step
centre of the prism, to speed up the ATR measurement. These small deviations/ATR
offsets, are calculated individually for each measurement and corrected electroni-
cally. This means that the horizontal and vertical angles are corrected twice: first by
the determined ATR errors for Hz and V, and then by the individual small deviations
of the current aiming.
IF the task is to
adjust a combination of
instrument errors
adjust the tilting axis
adjust the circular level
adjust the laser/optical
plummet
adjust the tripod
THEN
Refer to "4.3 Combined Adjustment (l, t, i, c and ATR)".
Refer to "4.4 Tilting Axis Adjustment (a)".
Refer to "4.5 Adjusting the Circular Level of the Instru-
ment and Tribrach".
Refer to "4.7 Inspecting the Laser Plummet of the
Instrument".
Refer to "4.9 Servicing the Tripod".
80