Leica TS11 User Manual page 99

TS11/TS15, Check & Adjust
Step Description
3. Loosen the vertical adjustment screws (e) and (f). Do not fully remove the
screws.
4. Loosen the fixing screws (b) and (c) as little as the spring force remains.
5. Horizontal adjustment:
To adjust the laser guide to the left, loosen the horizontal adjustment
screw (d). Tighten the horizontal adjustment screw (a) as much as to move
the laser beam slightly left of the upper crosshairs on the target plate.
6. To adjust the laser guide to the right, loosen the horizontal adjustment
screw (a). Tighten the horizontal adjustment screw (d) as much as to move
the laser beam slightly right of the upper crosshairs on the target plate.
7. Fix the horizontal adjustment by tightening the opposite horizontal adjust-
ment screw either (a) or (d).
Fixing the opposite screw moves the laser beam exactly to the
vertical crosshair.
8. Finish the horizontal adjustment by tightening the fixing screws (b) and (c).
Vertical adjustment:
9.
Loosen the vertical adjustment screw (e) as much as to move the laser
beam slightly upon of the upper crosshairs on the target plate.
99