Leica TS11 User Manual page 138

TS11/TS15, Safety Directions
Warning
Warning
urement mode. Aiming at prisms is only permitted when looking through the tele-
scope.
In remote controlled systems the laser beam can be moved automatically via serial
interface commands without direct control of the user.
Precautions:
Check carefully if the laser beam is automatically turned off at beam movements of
more than approximately 5° in horizontal or vertical direction to counteract hazards.
The use of laser class 3R equipment can be dangerous.
Precautions:
To counteract hazards, it is essential for every user to respect the safety precautions
and control measures specified in the standard IEC 60825-1 (2001-08) resp. EN
60825-1:1994 + A11:1996 + A2:2001, within the hazard distance *).
Following an interpretation of the main points in the relevant section of the standard
quoted.
Class 3R laser products used on construction sites and outdoors, for example
surveying, alignment, levelling:
138