TS11/TS15, Operation
Connect USB cable
to computer for
the first time step-
by-step
4
TS_090
Step
Description
1.
Start the computer.
2.
Plug the GEV223 cable into TPS instrument.
3.
Turn on the TPS instrument.
4.
Plug the GEV223 cable into the USB port of the computer. The Found New
Hardware Wizard starts up automatically.
5.
Check Yes, this time only. Next>.
6.
Check Install the software automatically (Recommended). Next>. The
software for Remote NDIS based LGS TS Device will be installed on your
computer
2
38
3