Enter/Exit Programming Mode
Configure Actions for Shift (16-key models only)
DEFAULT
Shift No Actions Configured
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, disable the SHIFT
by reading "Disable SHIFT function" on page 266, then
read "Configure Actions for Shift" on the left. Next
scan 4 digits from the Alphanumeric characters in
Configure Actions for Shift
Appendix D, Keypad
The first digit must be 0, the
second digit must be configured according to the
Table 30 on page 260
CMD_ID numbers in
. The
third and fourth digit must be zero.
264
PowerScan™ PD9130/PBT9100/PM9100