Plessey Set Length 1 - Datalogic PowerScan 9100 Series Product Reference Manual

Enter/Exit Programming Mode

Plessey Set Length 1

This feature specifies one of the bar code lengths for
trol. Length 1 is the minimum label length if in
first fixed length if in
data characters only. The length can be set from 01 to 50 characters.
Table 28
detailed instructions on setting this feature.
Table 28. Plessey Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT Plessey LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Plessey Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
208
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
01 Characters
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Variable Length
Mode. Length includes the bar code's
07 Characters 15 Characters
'0' and '7' '1' and '5'
CANCEL
PowerScan™ PD9130/PBT9100/PM9100
Plessey Length Con-
Mode, or the
page 297 for
50 Characters
'5' AND '0'