Code Ean/Upc; Coupon Control - Datalogic PowerScan 9100 Series Product Reference Manual

Enter/Exit Programming Mode

Coupon Control

This feature is used to control the reader's method of processing coupon
labels.
Options are:
•
•
•
To set this feature:
1. Scan the Enter/Exit bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
3. Complete the programming sequence by scanning the Enter/Exit bar
Coupon Control = Enable only UPC/EAN
78

CODE EAN/UPC

Allow all — allow all coupon bar codes to be decoded
UPC/EAN coupon decoding
Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
any unused bar codes on this and the facing page to ensure that the
scanner sees only the bar code you intend to scan.
code.
Coupon Control = Allow all
DEFAULT
Coupon Control = Enable only GS1 DataBar
PowerScan™ PD9130/PBT9100/PM9100