Plessey Set Length 2 - Datalogic PowerScan 9100 Series Product Reference Manual

Plessey Set Length 2

This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in
the second fixed length if in
code's check, data, and full-ASCII shift characters. The length does not
include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 29
instructions on setting this feature.
Table 29. Plessey Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT PLESSEY LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Plessey Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Variable Length
Fixed Length Mode. Length includes the bar
07 Characters 15 Characters
'0' and '7' '1' and '5'
Plessey Length Con-
Mode, or
page 298 for detailed
50 Characters
'5' AND '0'
CANCEL
209