Display Contrast; Font Size - Datalogic PowerScan 9100 Series Product Reference Manual

Display Contrast

Adjust the contrast of the display.
Set Display Contrast
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Font Size

Select the font size
DEFAULT
Font Size = Medium
1. 4-keys models only.
Product Reference Guide
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by two digits (00-32 by 01) from
the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code twice.
1
.
Enter/Exit Programming Mode
Appendix D,
CANCEL
Font Size = Small
Font Size = Large
255