Abc Codabar Dynamic Concatenation Timeout; Abc Codabar Force Concatenation - Datalogic PowerScan 9100 Series Product Reference Manual

ABC Codabar Dynamic Concatenation Timeout

This parameter specifies the timeout in 10-millisecond ticks used by the ABC Codabar
Dynamic Concatenation Mode. The timeout can be set within a range of 05 to 255 in 10ms
increments. A setting of zero specifies no delay.
Select ABC Codabar Dynamic Concatenation
Timeout Setting
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can then
start again at the beginning.

ABC Codabar Force Concatenation

Forces labels starting or ending with D to be concatenated.
DEFAULT
ABC Codabar Force Concatenation = Enable
Product Reference Guide
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT
bar code above, then the bar code at left fol-
lowed by digits from the Alphanumeric charac-
Appendix D, Keypad
ters in
desired character(s). End by scanning the
ENTER/EXIT bar code again.
10 = Quiet Interval of 200 ms
ABC Codabar Force Concatenation = Disable
representing your
CANCEL
159