User-Selected Data Area - Mercury VesselView 7 Manual

NOTE: An arrow icon will appear to the left and right of the scroller bar. When only one arrow icon is visible, you must
move the direction indicated by the arrow. When both arrows are visible, either direction can be toggled or swiped.
User‑Selected Data Area
During the scroller bar navigation process, when the icon is highlighted using the rotary knob, the user‑selected data area will
change to display the icon, the icon name, and a description of what the feature does. The user‑selected data area will show
this information for only five seconds, unless the rotary knob is pressed. Similarly, when using the touch and swipe method of
scroller bar navigation, touching the icons while swiping will display their name and feature description. A non swiping,
stationary touch within five seconds will activate that data in the user‑selected data area.
90-8M0087258 DECEMBER 2014
eng
b
56971
Section 3 - Screen Overview and Operation
a - Selected icon
b - Scroller bar arrows
a
Page 33