Mercury VesselView 7 Manual page 44

Section 3 - Screen Overview and Operation
• The items located in the data area footer require the selection to be touched or press the rotary knob to highlight and
accept.
a
b
c
Profile selection allows you to select from the five factory preset profiles and any custom settings you have created. Custom
settings can be modified and will default to the last known settings.
The set‑point value will allow the operator to adjust the RPM or speed set‑point. These will default to 10 mph or 1700 RPM until
the operator uses the QUICK SAVE option to override the default values.
• Set‑point is the default selection when Smart Tow is active. The operator can adjust the RPM or speed by touching the
data screen area.
a
After making adjustments to the desired settings, press the selection in the data area footer.
• Enable or disable turns the feature on or off. The RPM sweeps will be displayed as nonactive white sweeps. The operator
can modify all settings when Smart Tow is in the off (disabled) state.
a. Enabled (on) is green when active
Page 40
e
d 52192
Factory preset profiles
a - Set‑point default selection
52281
a - Profile selection
b - Set point value
c - Enable
d - Save
e - Exit
90-8M0087258
52280
DECEMBER 2014
eng