Trip Data Screen - Mercury MercMonitor Manual

ECONOMY RESET
• To recalculate the RPM and trim targets, press the
"REFRESH" ("+") button. The gauge software will calculate
the targets for the maximum economy.
Current values are:
5
Trim - 5 RPM - 2300
Peak Fuel M/G - 3.9
0
Recalculate ECO
TRIM
Values ?
[ EXIT ] [ NEXT ] [REFRESH]

Trip Data Screen

The "Trip Data" screen displays the current vessel speed. This
data is based on which sensor is active; pitot sensor, paddle
wheel, or GPS. The type of speed sensor is displayed on the
right side of the "Speed" information window. When the transition
speed is reached, the new active speed sensor will then be
displayed.
The trip distance ("Trip Dist") will display how far the vessel has
traveled. The trip distance can be reset.
The total fuel used ("Total Used") is the total of all the engines
running on the vessel, displaying how much fuel has been used
down to a tenth of the unit. The total fuel used can be reset.
eng
VESSEL MENU
ECONOMY
DECREASE
RPM
10 5
1.9
M/G
4890
RPM
33.1
RPM
MPH
MODE
2
a
42367
113
a - "REFRESH" ("+")
button