Section 2 - Initial Screens and Setup Wizard
Finishing Setup Wizard
Select Finish to complete the Setup wizard on the VesselView. Do not power off the unit until the Finish screen is replaced by
the vessel activity screen.
Data Source Setup
Data Sources
To setup data sources, select the HOME tab at the top of the screen.
Power on all products and key on all engines to ensure that all data generating sources can be detected. Open the System
Controls window. The System Controls window can be brought up by swiping from the top of the unit onto the screen. Select
the Settings tile. Select the Network option on the left‑hand side of the screen. Select Sources... .
Page 44
Sources ...
61530
61531
90-8M0109374
JUNE 2016
eng